No matter whether you are working with hydraulic equipment at work or you are working on a large scale project in your home, you need to make sure that you are up to speed on all of the inner workings of your hydraulic machinery. Whether it is a hydraulic pump or you are working with something a little bigger, such as an excavator, knowing the ins and outs of hydraulics will always come in handy. When it comes to having all of the parts and hydraulic supplies that you need for any tweaking, maintenance and/or repairs, knowing what to buy and where to get it will be another important piece of the puzzle.
What Is A Hydrualic?
Hydraulic systems use a compressed fluid that works to transfer force that is applied at one point, to another point. The basic components that any hydraulic system are made from include the following:
– Pump
– Reservoir
– Valves
– Motor
– Fluid
– Cylinder
– Hose
– Filter
Basically, the hydraulic reservoir will hold the non-pressurized hydraulics fluid, which is usually hydraulic oil. This fluid acts as the life blood for your entire hydraulic system and it passes through the filter that will collect any impurities.
The pump in the hydraulic system works to transfer the fluid out of the reservoir and into the system itself. The transfer helps to raise the fluid’s energy level simply by increasing pressure. The motor helps to supply the power source that the pump needs.
This high pressure fluid will act upon the piston and the rod within the cylinder portion. Each cylinder stroke will convert pressure into mechanical force. The oil level in the reservoir will fall whenever the rod and the piston are extending. As the piston and the rod retract, the fluid will go back into the reservoir and the walls inside will cool the fluid as heat is allowed to escape.
Where Can You Buy Supplies?
When it comes to taking care of your hydraulic system, you can make your way to the location where you purchased the equipment. You may also have a company in or around your local area that is known for servicing hydraulics and offering supplies to consumers. If there is ever any component of your hydraulic system that is even the slightest bit off kilter, it can cause it to run less efficiently. If there is something that is severely wrong, it could lead to a complete malfunction and costly repairs or replacement of parts.
There are poor performance issues that can be addressed by checking the following:
– No or low oil? Check out the reservoir and add additional oil as necessary.
– Worn pump? – Look at the system and repair, clean or replace components.
– Broken or slipping pump drive? – Check tension and alignment. You may have to replace couplings and belts.
– Pump section line air leaks? – Repair the line or replace if necessary.
For any of these fixes and more, all you have to have is the best hydraulic supplies on hand or know of a good supplier that you can buy them from.